Schrijf je HIER in op onze nieuwsbrief en ontvang 5% KORTING op jouw eerstvolgende bestelling!
Artikelcode
WB-F90000285

Walbro ''hellcat'' 525lph in-tank brandstofpomp (universeel)

Incl. 21% Btw
€ 222,00

Op voorraad

Omschrijving

Now available at A4H-TECH.COM - Introducing the highest output in-tank electric fuel pump on today’s market; the new Walbro DCSS 39/50 fuel pump!  This pump is able to support an aggressive 700+ horsepower on forced induction engines and the innovative dual-pumping channel design delivers maximum pressure with superior fuel flow. 

Operating in both gas and E85, this fuel pump comes with a check valve to avoid system leak-down and extended cranking at start-up.  This superior design results in improved hot fuel flow, minimal noise, increasing efficiency by 20% over conventional pumps, delivering unparalleled performance.

• Highest flow in-tank brushed fuel pump offering from TI Automotive
• Featuring award winning DCSS technology
• E85 compatible
• Internal check valve — prevent fuel system pressure bleed down — prevent extended cranks
• High pressure relief setting — support supercharger and turbo applications
• Capable of supporting 900+HP at 60PSI naturally aspirated applications
• Flush mountable to existing hanger with installation kit 400-1168


Fuel: GAS & E85
Horsepower: 900+ at 60PSI, naturally aspirated applications
Over All Pump Length: 131mm
Main Housing Diameter: 39mm
Lower Housing Diameter: 50mm
Fuel Inlet Diameter: 11mm OD
Fuel Outlet Diameter: 11mm OD
Flow Rate: 470lph @ 40psi (120+ gph)
Test Voltage: 13.5 Volts

Supplied INCLUDING filter/installation kit.

 

Toon meer

Stel een vraag over dit product

Schrijf uw eigen review

Alleen geregistreerde gebruikers kunnen reviews schrijven. Log in of maak alstublieft een account aan. inloggen of maak een account aan

Omschrijving

Now available at A4H-TECH.COM - Introducing the highest output in-tank electric fuel pump on today’s market; the new Walbro DCSS 39/50 fuel pump!  This pump is able to support an aggressive 700+ horsepower on forced induction engines and the innovative dual-pumping channel design delivers maximum pressure with superior fuel flow. 

Operating in both gas and E85, this fuel pump comes with a check valve to avoid system leak-down and extended cranking at start-up.  This superior design results in improved hot fuel flow, minimal noise, increasing efficiency by 20% over conventional pumps, delivering unparalleled performance.

• Highest flow in-tank brushed fuel pump offering from TI Automotive
• Featuring award winning DCSS technology
• E85 compatible
• Internal check valve — prevent fuel system pressure bleed down — prevent extended cranks
• High pressure relief setting — support supercharger and turbo applications
• Capable of supporting 900+HP at 60PSI naturally aspirated applications
• Flush mountable to existing hanger with installation kit 400-1168


Fuel: GAS & E85
Horsepower: 900+ at 60PSI, naturally aspirated applications
Over All Pump Length: 131mm
Main Housing Diameter: 39mm
Lower Housing Diameter: 50mm
Fuel Inlet Diameter: 11mm OD
Fuel Outlet Diameter: 11mm OD
Flow Rate: 470lph @ 40psi (120+ gph)
Test Voltage: 13.5 Volts

Supplied INCLUDING filter/installation kit.

 

Toon meer

Toepasbaar op:

Universeel
Toon meer

Gerelateerde producten

Walbro Brandstofpomp 450 lph (universeel) | WB-F90000267

Walbro Brandstofpomp 450 lph (universeel)

Artikelcode: WB-F90000267
€ 170,50
Tip
Walbro Brandstofpomp filter kit (universeel) | WB-400-846 | A4H-TECH.COM

Walbro Brandstofpomp filter kit (universeel)

Artikelcode: WB-400-846
€ 32,55
Tip
Walbro Brandstofpomp 255 lph excl. filter kit (universeel)

Walbro Brandstofpomp 255 lph excl. filter kit (universeel)

Artikelcode: WB-GSS342-EXCL-F
€ 99,00
Tip