Schrijf je HIER in op onze nieuwsbrief en ontvang 5% KORTING op jouw eerstvolgende bestelling!
Artikelcode
HYB-FLK-01-02

Hybrid Racing K-series swap brandstofleiding kit standaard zwart (Honda Civic 92-00/Integra 95-01/Del Sol 92-98)

Incl. 21% Btw
€ 193,95

Op voorraad

Omschrijving

The Hybrid Racing K-swap fuel line was designed to be a simple pre-assembled kit to adapt your stock fuel system to that of a K-series engine.


Why do you need a fuel line kit for K-swaps?

K-series engines are normally are supplied with return-less fuel systems, meaning the fuel pressure regulator is inside of the fuel tank and has only one line leading to the engine. In most cases, the chassis that you plan on installing your K series engine (in this case EG,EK,DC) utilizes a return system. In order to have the engine run correctly, you will need to convert the K-series engine to a return system. Although there is only one line going to the rail, this kit is still a return type system since the pressure is still regulated before it goes back to the tank.


The kit comes with 3 lines with the appropriate fittings pre-installed on the ends. The lines are offered in stainless steel or black nylon. The black kit is our most popular kit for its stealthy look but they both get the job done perfect. The kit also comes with a banjo fitting to connect to your OEM fuel filter and an adapter to connect to your hard line.


E85 compatible

Toon meer

Stel een vraag over dit product

Schrijf uw eigen review

Alleen geregistreerde gebruikers kunnen reviews schrijven. Log in of maak alstublieft een account aan. inloggen of maak een account aan

Omschrijving

The Hybrid Racing K-swap fuel line was designed to be a simple pre-assembled kit to adapt your stock fuel system to that of a K-series engine.


Why do you need a fuel line kit for K-swaps?

K-series engines are normally are supplied with return-less fuel systems, meaning the fuel pressure regulator is inside of the fuel tank and has only one line leading to the engine. In most cases, the chassis that you plan on installing your K series engine (in this case EG,EK,DC) utilizes a return system. In order to have the engine run correctly, you will need to convert the K-series engine to a return system. Although there is only one line going to the rail, this kit is still a return type system since the pressure is still regulated before it goes back to the tank.


The kit comes with 3 lines with the appropriate fittings pre-installed on the ends. The lines are offered in stainless steel or black nylon. The black kit is our most popular kit for its stealthy look but they both get the job done perfect. The kit also comes with a banjo fitting to connect to your OEM fuel filter and an adapter to connect to your hard line.


E85 compatible

Toon meer

Toepasbaar op:

Honda

Toon meer