Haltech Nexus R5 VCU + plug&pin set (universeel)
80% van de producten in onze shop liggen op interne of externe voorraad en hierdoor kunnen wij jouw order veelal spoedig verwerken (variërend van enkele uren tot een aantal werkdagen).
Uiteraard is het mogelijk dat een product een (onverwacht) lange levertijd heeft.
Na ontvangst van je bestelling, zullen wij je hierover informeren en bieden indien nodig eventuele beschikbare alternatieven aan.
Wij geven bewust achteraf voorraadinformatie over onze producten, omdat veel leveranciers geen systeem aanbieden om dit te kunnen koppelen en wij vooraf geen ''schattingen'' willen tonen zoals bij vele andere webshops, waar je helaas achteraf alsnog een andere/langere levertijd krijgt te horen dan stond aangegeven.
We willen jou alleen actuele informatie geven op het moment van verwerking van de bestelling, zodat we je niet hebben kunnen misleiden met een schatting.
Als je een product heel snel nodig hebt en je wil er zeker van zijn dat we het op voorraad hebben, e-mail of bel ons dan of stuur een bericht via ''stel een vraag over dit product''.
Haltech Nexus R5 VCU + plug&pin kit.
The Haltech Nexus R5 VCU (Vehicle Control Unit) with a plug and pin kit is the standalone flagship control system in the Haltech lineup, designed for elite racing applications and custom wiring projects. This ultra-powerful device seamlessly integrates a state-of-the-art engine management system, a power distribution module (PDM), a dual-channel wideband controller, and a high-capacity data logger into a single unit. By combining these advanced systems, the Nexus R5 simplifies your vehicle's entire electrical architecture, reducing weight and eliminating the need for external modules.
This package includes a comprehensive plug and pin set, making it ideal for converting an existing wiring loom to suit Nexus R5 applications.
Features and Software Functions:
- Flagship Integration: Combines an advanced ECU, PDM, dual wideband controllers, and massive data logging in a single device
- Integrated PDM: Features four 25A high-current outputs and twelve 8A high-side outputs to power injectors, coils, transbrakes, fans, and accessories directly
- Complete Tuning Control: Managed via Nexus Software Programmer (NSP) with up to 4D long-term learning and 32x32x8 4D tuning tables
- Advanced Race Functions: Features traction control, launch control, trans brake control, race timer, anti-lag, and rotational idle
- Dual Drive-By-Wire: Full support for dual electronic throttle bodies with built-in redundancies
- Automatic Transmission Control: Compatible with Ford (AODE/4R70W), GM (4L60E/4L80E), Toyota (A340E), Lenco, and Liberty transmissions
- High-Speed Logging: Onboard logging of up to 300 channels at sample rates up to 1ms (1kHz) with a massive 512MB internal memory
- Modern Connectivity: Onboard Wi-Fi and USB-C port for low power up via cable, compatible with the Haltech Connect App
- Multi-Level Engine Protection: Features an integrated, highly advanced engine protection system
- Suspension and Traction: Supports shock travel and ride height monitoring, alongside advanced torque management targeting driveshaft and engine RPM
- Nitrous Control: Up to 6 stages of nitrous control
- Variable Cam Control: Up to 4-sensor variable cam control
- Flex Fuel: Seamless flex fuel compatibility
- Intake Air Bleed Control: Integrated air bleed control
- Knock Control: Dual knock control support
- Flat Shift Support: Advanced flat shift control
Specifications:
- Injection Drivers: 18 (peak and hold, can be used as low-side outputs)
- Ignition Outputs: 12 x low-current (can be used as low-side outputs)
- Ignition Switch Input: 1
- Engine Control Relay Output: 0
- Total Digital Pulsed Outputs (DPO): 8
- Half Bridge Outputs (HBO): 4 x 8A (PWM capable, e.g., for electronic throttle)
- On-Board PDM: Yes
- 25A High Current Outputs (HCO): 4
- High-Side Outputs: 12 x 8A continuous (low speed PWM, 200 Hz)
- CAN Bus Networks: 3 with switchable termination
- MAP Sensor: External
- Inertia / G-Sensor: Yes
- USB 2.0: USB-C
- Low Power Up via Cable: Yes
- Wi-Fi: Yes
- Compatible with Haltech Connect App: Yes
- Anti-Lag/Rotational Idle: Yes
- Boost Control: 4D Closed Loop
- Closed Loop O2 Control: Dual (supporting NTK/LSU 4.9 sensors)
- CO2 Control: Yes
- Drive-By-Wire Throttle: Dual
- Engine Protection: Multi-Level
- Flat Shift Support: Advanced
- Flex Fuel: Yes
- Intake Air Bleed Control: Yes
- Knock Control: Dual
- Launch Control: Yes
- Long Term Learning: Up to 4D
- Nitrous Control Stages: Up to 6
- Race Timer: Yes
- Rolling Anti-Lag: Yes
- Shock Travel & Ride Height: Yes
- Torque Management: Yes (Driveshaft and Engine RPM Targeting)
- Traction Control: Yes
- Trans Brake: Yes
- Tuning Table Resolution: 32x32x8 4D
- Variable Cam Control: Up to 4
- Onboard Storage: 512MB
Kit Includes:
- (1) Haltech Nexus R5 VCU
- (1) Set of SurLok connectors (Red and Black)
- (1) Wi-Fi antenna
- Mounting bolts
- USB-C Cable and USB-C dust cap
- (1) Plug and pin set: AMP 26 pin (key 1 and 3), 34 pin (key 1 and 2), and DTP-4
