Speedfactory Wagonvan Mfactory Differential D16 40mm installation kit (D/B/H/F/K serie engines)
90% of the products in our store are in internal or external stock and we can often process your order quickly (varying from a few hours to a number of business days).
Naturally it is possible that a product has an (unexpected) longer delivery time.
Upon receipt of your order, we will always inform you about this and offer any available alternatives. So keep a close eye on your mailbox.
We deliberately provide stock information about our products afterwards, because many suppliers do not offer a ''stock link system'' and we do not want to show '' estimates '' in advance, like many other webshops do (which are often incorrect and give you wrong information in advance). We only want to give our customers actual information on the moment of processing the order so we don't mislead our customers.
If you need a product VERY quickly and you need to be sure that we have it in stock, please e-mail or call us or send a message via ''ask a question about this product'' below in the product description.
We are proud to introduce our pain-free installation kit for the MFactory D16 40mm LSD into the Wagovan RT4WD rear ends. This is by far the easiest and most cost-effective drop-in LSD solution when paired with our bolt + shim installation kit!
You will save yourself hours of labor and frustration and retain the critical proper factory installed backlash & gear mesh pattern. Forget about machining bolts & bolt holes or machining your LSD flange, fussing with repeated test fitting, and attempting to source the proper shims. You’ll be able to use the existing secondary holes in the MFactory LSD with our custom designed Grade 12.9 bolts that incorporate both a low profile flanged head that clears the differential carrier as well as a stepped shoulder profile that eliminates all ring gear side-to-side play for proper drop-in fitment.
If you appreciate attention to detail and painless installation you will love this – just drop on our stainless steel shims before pressing on the differential bearings, install the ring gear with our custom bolts torqued to 75 ft-lbs, and reassemble using the original factory installed outer shims. That’s it!
Pair our installation kit with an MFactory LSD for the ultimate in ease of use & proven performance at a great price!
Installation Kit Includes:
• x10 Black Oxide Coated Grade 12.9 Bolts
• x2 Precision Stainless Steel shims
• NOTE: Order Honda PN# 91006-PX5-008 if you need new differential bearings (not included). These are the correct 40x68x22 NTN bearings that are needed for the Wagovan RT4WD rear differential.
**This kit is intended for installing an LSD in a good condition rear end. If you are performing a full rear end rebuild then you will still need to check and set all tolerances as usual with regard to the pinion shaft.
